Advidia "A" Series Bedienungsanleitung PDF herunterladen (Seite 24)

Firmware User Manual

4. Repeat steps 2 and 3 to add more preset points to the tour.

5. Once done, click the Save button on Select a Preset Point.

6. On Touring Control, select the tour name to activate. Once activated, the camera will start the

tour.

How to Use the Scan Function (for PTZ only)

The Scan Control page enables the camera to go from one predefined point to another by scanning the

view horizontally without losing focus. Unlike in preset tours, wherein the camera goes to one preset

point to another quickly and focusing only on the present point area, scan function goes over point 1 to

point 2 on a steady pace with the whole viewing angle in complete focus. The scan speed can also be

configured according to user preference.

Click the Scan Control page tab to configure scan function.

To set or modify scan points, do the following:

1. On Scan Points, click the icon of scan point 1 to set the scan starting point.

2. Pan and tilt on the area that you want to set as scan point 1.

3. Once done, click the icon again to close and complete first scan point.

4. Click the icon of scan point 2 to set the scan ending point.

5. Pan and tilt on the area that you want to set as the ending point.

6. Once done, click the icon again to close and complete scan point 2.

7. Select the preferred Scan Speed (the bigger the number, the faster the speed).

8. Select the preferred Scan Direction: Clockwise or counter-clockwise (this features is available

only in speed dome cameras.

Scan Direction (Not

available on B-210)

Scan Speed

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 111 112

Keine Kommentare

Advidia "A" Series Bedienungsanleitung Seite 24