Advidia "A" Series Bedienungsanleitung PDF herunterladen (Seite 32)

Advidia A Series Network Camera User Manual

Figure 5-12 NO-IP DNS Settings

(2) Enter the Server Address as www.noip.com

(3) Enter the Domain name you registered.

(4) Enter the Port number, if needed.

(5) Enter the User Name and Password.

(6) Click Save and then you can view the camera with the domain name.

5.7 Configuring SNMP Settings

Purpose:

You can set the SNMP function to get camera status, parameters and alarm related

information and manage the camera remotely when it is connected to the network.

Before you start:

Before setting the SNMP, please download the SNMP software and manage to receive the

camera information via SNMP port. By setting the Trap Address, the camera can send the

alarm event and exception messages to the surveillance center.

Note: The SNMP version you select should be the same as that of the SNMP software. And

you also need to use the different version according to the security level you required.

SNMP v1 provides no security and SNMP v2 requires password for access. And SNMP v3

provides encryption and if you use the third version, HTTPS protocol must be enabled.

Steps:

1. Enter the SNMP Settings interface:

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 100 101

Keine Kommentare

Advidia "A" Series Bedienungsanleitung Seite 32