Advidia "A" Series Bedienungsanleitung PDF herunterladen (Seite 35)

Advidia A Series Network Camera User Manual

QoS (Quality of Service) can help solve the network delay and network congestion by

configuring the priority of data sending.

Steps:

1. Enter the QoS Settings interface:

Configuration >Advanced Configuration > Network > QoS

Figure 5-15 QoS Settings

2. Configure the QoS settings, including video / audio DSCP, event / alarm DSCP and

Management DSCP.

The valid value range of the DSCP is 0-63. The bigger the DSCP value is, the higher the

priority is.

Note: DSCP refers to the Differentiated Service Code Point; and the DSCP value is used in

the IP header to indicate the priority of the data.

3. Click Save to save the settings.

Note: A reboot is required for the settings to take effect.

5.10 Configuring UPnP™ Settings

Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility

among networking equipment, software and other hardware devices. The UPnP protocol

allows devices to connect seamlessly and to simplify the implementation of networks in the

home and corporate environments.

With the function enabled, you don’t need to configure the port mapping for each port, and

the camera is connected to the Wide Area Network via the router.

Steps:

1. Enter the UPnP™ settings interface.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 100 101

Keine Kommentare

Advidia "A" Series Bedienungsanleitung Seite 35