Advidia "A" Series Bedienungsanleitung PDF herunterladen (Seite 96)

Advidia A Series Network Camera User Manual

9.11 RS-232 Settings

Purpose:

The RS-232 port can be used in two ways:

 Parameters Configuration: Connect a computer to the camera through the serial port.

Device parameters can be configured by using software such as HyperTerminal. The

serial port parameters must be the same as the serial port parameters of the camera.

 Transparent Channel: Connect a serial device directly to the camera. The serial device

will be controlled remotely by the computer through the network.

Steps:

1. Enter RS-232 Port Setting interface:

Configuration> Advanced Configuration> System > RS232

Figure 9-16 RS-232 Settings

Note: If you want to connect the camera by the RS-232 port, the parameters of the RS-232

should be exactly the same with the parameters you configured here.

2. Click Save to save the settings.

9.12 RS-485 Settings

Purpose:

The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ

parameters should be done before you control the PTZ unit.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101

Keine Kommentare

Advidia "A" Series Bedienungsanleitung Seite 96